The frequency of these recharges can range from every few days to over a week between cycles. The frequency of recharges will fluctuate based on your water use, and each recharge will be slightly different, using varying amounts of salt and water. The automatic recharges will only run at the time specified in your programming.
Your softener has an ongoing tally of how many recharges have happened since the initial installation. To access this:
1. Hold the Select button on your display panel until '000' appears, then let go.
2. Hold the Down arrow to display the total number of recharge cycle since installation. This is a tally of all the manual and automatic recharges.
Days of Service
3. To find how often your unit is recharging, hold the Up arrow. This is the total number of days your unit has been in service since it was initially plugged in.
4. Take the total days in service divided by the total number of recharges (from step 2). This will give you the average number of days between recharge cycles. See the example below:
104 Days / 17 Recharges = approx 6 Days between recharge cycles
If you are still unsure if your system is recharging automatically, visit our Metering article. The softener is programmed to recharge based on the gallons that are metered through the system.