Blinking Amber Light on the Display

 

If the app shows that your softener is online, but you still have a blinking light, follow these steps to reclaim your unit:

Unplug your softener and router. Replug both and then follow these steps:

1. In the App - Go to the Home Screen and press the '+' button (this does not add a second device, just reclaims your current unit). 

2. On the Softener - Press and hold the Up/Down arrows together until 'CONN' appears on the on the display. 

3. In the App - Click on the serial number that appears below the Available Device(s). Then, select your home wifi network and enter the password.

4. Create a nickname and click Save and Continue. 

5. Create a nickname for your unit, and click 'Complete Setup'. 

6. On the softener - The display screen should go back to the time. If it still shows the 'CONN' screen, press Select on the softener.