Adding water softener cleaner to your water softener every 4 months will help your system work at peak performance. This solution cleans the inside of your system of contaminants, iron and scale buildup to maximize your softener’s efficiency.
Morton® Water Softener Cleanser purchase information and available retailers can be found here.
a. Confirm your softener is out of bypass (handle should be pulled out):
b. Locate the Brinewell inside your salt tank. It is the 4-inch diameter dark tube with a lid on top. This lid will either pop off or screw off counterclockwise:
c. Pour one bottle of Cleanser down the Brine well tube and replace the lid.
d. Hold the ‘Recharge’ button until the motor kicks on, then let go. This will start a recharge cycle (2 ½ hour duration).
e. After the recharge is completed, run a few cold water faucets for 5-10 minutes to rinse any residual cleanser from the unit.