The Clean feature is ony available on select models. It allows you to add an additional backwash and rinse period to the beginning of every recharge cycle.
*Feature only available on select models*
M45 and M45C
We recommend starting low and increasing the duration of this cycle over time if needed. This will allow for higher efficiency and water conservation.
1. Hold the Select button down until '000' appears, then let go.
2. Tap the Select button twice to display 'Clean' and 'OFF' on the screen. Use the Up or Down arrow to switch this 'ON'.
3. Tap the Select button again to chose the duration of the clean cycle using the Up/Down arrows. This can be set from 1 to 15 minutes.
4. Continue tapping the Select button until you return to the home screen with the current time.