There are some ways in which you can customize the programming for your water softener. Take a look at the options below and check out the articles to learn more.
Salt Efficiency
Check out our article 'E' Efficiency Setting to learn what the setting does and how to activate it.
12/24 Hour Clock
Hold the Select button until '000' appears, then let go. Tap Select until you see '12 or 24 hr' on the screen. It should automatically be set at 12 hr (1 -12am, 1 - 12pm). If you want the 24 hour format, press the up button to have '24 hr' shown on the screen. Then press Select to move on.
Backwash and Rinse Times
The Backwash and Rinse cycles are designed to flush your resin beads of any leftover salt, hardness minerals, and debris. These times are often customized by homeowners with a water source high in iron or sediment.
How to Program Backwash/Rinse Cycles (click here)
1. Hold the Select button down until '000' appears, then let go. Tap the Select button until you see the display showing 'Add'.
2. Use the Up/Down arrows to set this Backwash feature to between 1-15 minutes.
3. Tap the Select button again to choose the Rinse cycle time. Use the Up/Down arrows here to set the duration.
4. Continue tapping the Select button to return to the home screen.
Please let us know if this article was helpful by voting below.